UHF Embedded Module – M600

Highlights

RFID IC: Impinj E310 / E510 / E710
Supports EPC C1 GEN2 (ISO 18000-63)
Powerful RF Output: Up to 30dBm
High Reading Rate/Range: 350 – 1000 Tags/s & Up to 12 Meters
Small form factor / SMD ready
UART – TTL Interface
Radio Specifications
Operating Frequency840…960 MHz, Configurations for
USA: 902…928 MHz (FCC),
EU: 865…868 MHz (ETSI)
RFID ICImpinj E310 / E510 / E710
RF TX Power+5…30 dBm, adjustable in steps of 1 dB
RF Sensitivity-73 dBm
Reading RangeUp to 9 meters*
RF Impedance50 Ω
Electrical Specifications
Power Supply3.6…5 Vdc
Power Consumption850 mA @ +30 dBm TX Power
50 mA Standby
50 µA Power Down Mode
ConnectorsSolder Joints
Communication InterfaceUART TTL port
Baudrate9600…921600 bit/s, 115200 bits/s factory default
GPIO
  • 2 Inputs TTL Levels: Logic low: < 0.8 V, minimum 0V Logic high: > 2 V, maximum 3.3 V
  • 2 Outputs TTL Levels: Logic low: maximum 0.4 V Logic high: minimum 2.9V, maximum 3.3
  • IO: The maximum output current of the port is 5mA
Mechanical Specifications
Dimensions28 × 28 × 4 mm
Weight10 g
MaterialPCB: FR4
Shielding frame: nickel-nickel copper
Shield cover: stainless steel
  
Environmental Conditions
Operating Temperature-20 °C … +55 °C
Storage Temperature-40 °C … +85 °C
Humidityup to 95 %, non-condensing
Supported Standards / Tags
ISO StandardISO 168000-63 (EPC Class 1 Gen 2)
Read Rate350 – 1000 tags/s
Tag Cache≥ 1000 Tags @ 12 Bytes EPC size
SDK Information
Supported OSWindows, Linux, Android
Supported LanguagesC, C#/.NET, Java
Demo SoftwareWindows

Other functions and details to be continued and upgraded.


The iDTRONIC RFID EMBEDDED UHF SMD Module M600 is a highperformance UHF RFID module based on the IMPINJ New Generation reader chips (E310/E510/E710). Manufactured as a surface-mounted device (SMD) with a max. RF output power of 30 dBm and supporting real-time onboard temperature monitoring, this module allows for rapid and seamless integration, especially in PDA and desktop RFID devices.

It is equipped with UHF Technology EPC Class 1 Gen 2 (ISO 18000-63) and is globally applicable with a frequency band of 840 – 960 MHz. The M600 UHF SMD module has a single mono-static RF port as antenna interface that supports a power output of max 30 dBm, which enables it to rapidly read between 350 and 1,000 tags per second (depending on the IC Chip).

iDTRONIC’s hardware comes with a useful SDK for the development of controller, Linux or Windows based applications. In addition to the documentation, command protocols and source codes, the SDK includes a Windows-based demo application providing full functionality over all supported UHF RFID standards.

Application areas
  • Mobile applications
  • USB-powered devices
  • Short range devices

This might also interest you

Request a Free Consultation

67059 Ludwigshafen
(Mon - Fri)