UHF Cylindrical Reader – BLUEBOX

Highlights

866 – 868 MHz | 902 – 928 MHz
EPC C1 GEN2 (ISO 18000-63)
RS232, RS485, CANbus
≤ 40 cm [Integrated Antenna]
IP67 Protection Class
Electrical Specifications
Power Supply10…36 Vdc
Power Consumption+24 dBm | 250 mW
Operating Frequency865 – 868 MHz (ETSI) | 902 – 928 MHz (FCC on request)
RF Output Powermax. 0.5 W (+27 dBm), software configurable
RF Input Sensitivity–87…–51 dBm, software configurable
AntennaIntegrated
Operating Distanceup to 40 cm
Communication InterfacesRS232 (R-IN-UHF-5224U) | RS485 (R-IN-UHF-5225U)
CANbus: SAE J1939 (R-IN-UHF-5226U) | CANopen (R-IN-UHF-5227U)
Status Display1 bicolor LED
Connector5 pin M12 A-coded male connector
Antenna Specification
Antenna Gain-8 dBic
Beam Width100° | 170°
Axial Ratio< 1.5 dB
Polarizationcircular
Mechanical Specification
Housing MaterialNickelled brass + PC
Overall DimensionsM30 × 1.5 × 90.65 mm
Weight115 g
Protection ClassIP65
Environmental Conditions
Operating Temperature-20 °C to +55 °C
Storage Temperature-40 °C to +65 °C
Humidityup to 95 % non-condensing
Supported Standards | Tags
 Standard ISO 18000-63 (EPC Class 1 Generation 2)
E.g.: Alien Higgs 2/3/4, Impinj Monza, NXP UCODE, etc.
Applicable Standards
EMCEN 301489-1:2012-04 (v1.9.21),
EN 301489-3:2013-12 (V1.6.1)
Radio RegulationEN 300330-1:2015-08 (V1.8.1),
EN 300330-2:2015-08 (V1.6.1)
SafetyEN 60950-1:2014-08,
EN 62369-1:2010-03,
EN 50364:2010-11
RoHSEC Guideline 2011/65/EU
CertificateCE
SDK Information
Supported OSWindows 7, 8, 10
Supported LanguagesC#, C++, serial command protocol
Demo SoftwareWindows


The compact RFID UHF Cylindrical Reader – BLUEBOX Industry 4.0 reader is a stationary Allround RFID industrial reader for automation processes in industry. Its output power is up to +24 dBm / 250 mW. Power can be regulated from 10 dBm in 1 dBm steps. In combination with the integrated circular antenna with -8 dBi antenna gain, the M30 Cylindrical Reader achieves reading distances up to 40 centimeters in industrial environments.

RFID UHF Cylindrical Reader – BLUEBOX is a stationary all-round RFID reader for automation processes in industry and supply chain applications.
The cylindrical design is exclusive and unique on the market and was developed by iDTRONIC.

This RFID reader is equipped with RS232, RS485 or CANbus (SAE J1939 or CANopen) as well as a 10 – 36 volt power supply interface. Thanks to the cylindrical M30 housing with standardized M12 connector, it can be quickly and flexibly integrated into many existing applications.

RFID UHF Cylindrical Reader – BLUEBOX from iDTRONIC Professional uses the popular BLUEBOX Software Development Kit with demo and setup tools. The Windows-based tools support all operating systems from XP to Windows 10. Together with the C ++, C # and ASCII command protocol, the SDK provides an easy way to integrate this RFID UHF Reader.

Application areas
  • Industrial Automation
  • Asset Tracking
  • Supply Chain
  • Waste Management
  • Access Control

This might also interest you

Request a Free Consultation

67059 Ludwigshafen
(Mon - Fri)