UHF Mid Range Reader – BLUEBOX


868 – 868 MHz | 902 – 928 MHz
EPC C1 GEN2 (ISO 18000-63)
RS232, RS485, Ethernet, CANbus
≤ 8 m [Integrated Antenna]
IP65 Protection Class
Electrical Specifications
Power Supply10 … 36 Vdc, PoE
Power Rating15 W @ +27 dBm
Operating Frequency840 – 960 MHz
Max. Powermax 0.5 W (27 dBm); software programmable in 1 dB steps
Operating Distanceup to 8 meters / 26 feet
Digital Inputs2 optoisolated inputs, 10 – 36 Vdc, max 20 mA @24 Vdc
Digital Outputs2 relay outputs, 1 A@30 Vdc, 0.5 A@125 Vac
StatusLED, Buzzer
InterfacesRS232 | RS485, Ethernet, Wiegand oder CANbus (SAE J1939 or CANopen)
Service InterfaceUSB VirtualCom
ConnectionsM12 connectors
Mechanical Specifications
Housing MaterialDie-cast aluminium, plastic
Dimensions190 × 190 × 80 mm
Housing ColourRAL 7045
Protection ClassIP65
Environmental Conditions
Operating Temperature-20 °C … +55 °C
Storage Temperature-40 °C … + 85 °C
Humidityup to 95 %, non condensing
Supported Standards / Tags
 Standard ISO 18000-6C (EPC Class 1 Generation 2)
Antenna Specifications
Gain7.5 dBic (min)
VSWR1.3:1 (typ) 1.5 : 1(max)
3dB Beamwidth67° (typ)
Azimuth Elevation73° (typ)
Axial Ratio at Boresight2 dB (typ) 2.5 dB (max)
Axial Ratio @ ± 30º3 dB (max)
F/B Ratio-16 dB (typ)
Applicable Standards
EMCEN 301 489-3
Radio RegulationEN 302 208-2
SafetyCEI EN 60950-1, CEI EN 50364
SDK Information
Supported OSWindows 7, 8
Supported LanguagesC#, C++, serial command protocol

The rugged RFID UHF Mid Range Reader – BLUEBOX with integrated antenna delivers maximum performance in AVI areas.

The UHF RFID industrial reader and writer of the BLUEBOX Professional RFID product series was designed for both industry 4.0 and outdoor applications.
Inside, one of our 27 dBm RFID Embedded UHF modules is used. This allows reading distances of up to 8 meters to be achieved.

A high degree of flexibility is ensured by the RS232 / RS485 and Ethernet interfaces.
Optionally, the RFID UHF Mid Range Reader – BLUEBOX is also equipped with Wiegand or CANbus (SAE J1939 or CANopen) interface.

The IP65 rated RFID industrial readers can be used in the ETSI and FCC frequency ranges.
Like all BLUEBOX RFID products, the reader supports our proven SDK and demo tool.

Application areas
  • Parking Systems
  • AVI
  • Waste Management
  • Logistics

This might also interest you

Request a Free Consultation

67059 Ludwigshafen
(Mon - Fri)